4 1 Heat Shrink Tubing

Product Detail

4 1 Heat shrink tubing

G-(4X) Dual Wall Adhesive Lined Heat Shrink Polyolefin Tubing, 4:1 shrinking, this adhesive lined heat shrink has an extra large 4:1 shrinkage ratio for easy installation over irregular or large components, with excellent electrical and mechanical properties, it is flexible and flame retardant.






Features

1. 4:1 Very high shrink ratio

2. Longitudinal shrink ratio: =+8%

3. Out jacket flame retardant, inner adhesive self-extinguished

4. Super sealing against water, moisture or other contaminants

5. Continuous operating temperature: -55?~ 125?

6. Shrink temperature: 120?

7. UL approved, comply with RoHS, REACH

 

Dimensions

Size		As supplied	After    recovery (mm)			Standard Package
Inch	mm	Inertnal    Diameter(mm)	Inertnal    Diameter	Total Wall    Thickness	Wall Adhesive    thickness of Adhesive	m/spool
5/32	4	4	1	1.0±0.15	0.4±0.15	200
1/4	6	6	1.5	1.1±0.15	0.5±0.15	100
5/16	8	8	2	1.2±0.15	0.5±0.15	50
1/2	12	12	3	1.4±0.15	0.6±0.15	1.22m/pc
5/8	16	16	4	1.7±0.25	0.6±0.15	1.22m/pc
25/32	20	20	5	2.0±0.25	0.6±0.15	1.22m/pc
1	24	24	6	2.1±0.30	0.7±0.15	1.22m/pc
3/2	32	32	8	2.4±0.30	0.7±0.15	1.22m/pc
2	52	52	13	2.4±0.30	0.7±0.15	1.22m/pc

 

Technical Data:

Property	Test Method	Stantard
Tensile Strength(Mpa)	ASTM D2671	=10.4
Elongation	ASTM D2671	=300
Tensil Strength afterAging   (Mpa)	UL 224 158×168hr	=7.3
Elongation after Aging(%)	UL 224 158?×168hr	=200
Dielectric Strength(kv/mm)	IEC 243	= 15
Volume Resistance(O.·cm)	ASTM D876	=1× 1014
Hot Melting Adhesive Property
Property	Test Method	Stantard
Water absorption ratio:	ASTM-D570	<0.2%
Softing point	ASTM-E8	95?
Strength of pearing(PE)	ASTM-D1000	120N/25m
Strength of pearing(AL)	ASTM-D1000	80N/25m